ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 419)

100

101

Command Reference Guide Frame Relay Sub-Interface Config Command Set

bridge-group <group#> priority <value>

Use the bridge-group priority command to select the priority level of a port associated with a bridge. To

return to the default bridge-group priority value, use the no version of this command.

Syntax Description

<group#>

Bridge group number (1 to 255) specified using the

bridge-group

command

<value>

Priority value for the bridge group; the lower the value, the higher the priority

(valid range: 0 to 255)

Default Values

<value>

128

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), and

virtual frame relay sub-interfaces (fr 1.20).

Command History

Release 1.1 Command was introduced

Functional Notes

The only time that this priority level is used is when two interfaces with a path to the root have equal cost. At

that point, the level set in this command will determine which port the bridge will use. Set the priority value

lower to increase the chance the interface will be used.

Usage Examples

The following example sets the maximum priority on the frame relay sub-interface labeled 1.16 in bridge group

17:

(config)#

interface frame-relay 1.16

(config-fr 1.16)#

bridge-group 17 priority 0

1 2 ... 414 415 416 417 418 419 420 421 422 423 424 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 419

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing