ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 345)

100

101

Command Reference Guide T1 Interface Configuration Command Set

snmp trap line-status

Use the snmp trap line-status command to control the Simple Network Management Protocol (SNMP)

variable dsx1LineStatusChangeTrapEnable (RFC 2495) to enable (or disable) the interface to send SNMP

traps when there is an interface status change. The dsx1LineStatusChangeTrapEnable variable is set to

enabled by default.

Syntax Description

No subcommands

Default Values

By default, the dsx1LineStatusChangeTrapEnable OID is set to enabled for all interfaces except virtual

frame relay interfaces.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: T1 (t1 1/1), DSX-1 (t1 1/2), serial (ser 1/1), DDS (dds

1/1), virtual frame relay interfaces (fr 1), and virtual PPP interfaces (ppp 1).

Command History

Release 1.1 Command was introduced

Functional Notes

The

snmp trap line-status

command is used to control the RFC 2495 dsx1LineStatusChangeTrapEnable OID

(OID number 1.3.6.1.2.1.10.18.6.1.17.0).

Usage Examples

The following example disables the line-status trap on the T1 interface:

(config)#

interface t1 1/1

(config-t1 1/1)#

no snmp trap line-status

1 2 ... 340 341 342 343 344 345 346 347 348 349 350 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 345

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing