ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 336)

100

101

T1 Interface Configuration Command Set Command Reference Guide

coding [ ami | b8zs ]

Use the coding command to configure the line coding for a T1 or DSX-1 physical interface. This setting

must match the line coding supplied on the circuit by the provider.

Syntax Description

ami

Configures the line coding for alternate mark inversion.

b8zs

Configures the line coding for bipolar eight zero substitution.

Default Values

By default, all T1 interfaces are configured with B8ZS line coding.

Command Modes

(config-t1 1/1)# T1 or DSX-1 Interface Configuration Mode required.

(config-t1 1/2)#

Command History

Release 1.1 Command was introduced.

Functional Notes

The line coding configured in the unit must match the line coding of the T1 circuit. A mismatch will result in line

errors (e.g., BPVs).

Usage Examples

The following example configures the T1 interface for AMI line coding:

(config)#

interface t1 1/1

(config-t1 1/1)#

coding ami

1 2 ... 331 332 333 334 335 336 337 338 339 340 341 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 336

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing