ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 393)

100

101

Command Reference Guide BRI Interface Configuration Command Set

isdn spid1 <spid> <ldn>

Use the isdn spid1 command to specify the Service Profile Identifiers (SPIDs). Use the no form of this

command to remove a configured SPID.

The BRI Module requires all incoming calls to be directed to the Local Directory Number

(LDN) associated with the SPID programmed using the isdn spid1 command. All calls to

the LDN associated with SPID 2 will be rejected (unless part of a BONDing call).

Syntax Description

<spid>

Specifies the 8 to 14 digit number identifying your Basic Rate ISDN (BRI) line in

the Central Office Switch. A SPID is generally created using the area code and

phone number associated with the line and a four-digit suffix. For example, the

following SPIDs may be provided on a BRI line with phone numbers 555-1111 and

555-1112:

SPID1: 701 555 1111 0101

SPID2: 701 555 1112 0101

<ldn>

*Optional

Local Directory Number (LDN) assigned to the circuit by the service provider. The

LDN is the number used by remote callers to dial into the ISDN circuit. If the <ldn>

field is left blank, the ADTRAN OS will not accept inbound dial-backup calls to the

BRI module.

Default Values

By default, there are no configured SPIDs

Command Modes

(config-bri 1/2)# BRI Interface Configuration Mode required

Command History

Release 1.1 Command was introduced

Functional Notes

The ADTRAN OS does not support “spid-less” 5ESS signaling. SPIDs are required for all configured BRI

endpoints.

1 2 ... 388 389 390 391 392 393 394 395 396 397 398 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 393

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing