ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 167)

100

101

Command Reference Guide Global Configuration Mode Command Set

interface loopback <label>

Use the interface loopback command to create a virtual interface that can be assigned layer 3 and higher

properties and is always up unless the router is shut down. Use the no form of this command to delete a

configured loopback interface.

Syntax Description

<label>

Specifies the numerical virtual loopback interface identifying label (valid range: 1

to 1024)

Default Values

By default, there are no configured loopback interfaces.

Command Modes

(config)# Global Configuration Mode required

Command History

Release 3.1 Command was introduced

Usage Examples

The following example creates a loopback virtual interface (labeled 1) and enters the Loopback Interface

Configuration Mode:

(config)#

interface loopback 1

(config-loop 1)#

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 167

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing