ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 341)

100

101

Command Reference Guide T1 Interface Configuration Command Set

loopback remote line [ fdl | inband ]

Use the loopback remote line command to send a loopback code to the remote unit to initiate a line

loopback. Use the no form of this command to send a loopdown code to the remote unit to deactivate the

loopback.

Syntax Description

fdl

Uses the facility data link (FDL) to initiate a full 1.544 Mbps loopback of the signal

received by the remote unit from the network.

inband

Uses the inband channel to initiate a full 1.544 Mbps physical loopback (metallic

loopback) of the signal received from the network.

Default Values

No defaults necessary for this command.

Command Modes

(config-t1 1/1)# T1 Interface Configuration Mode required (does not apply to DSX-1 interfaces)

Command History

Release 1.1 Command was introduced

Functional Notes

The following diagram depicts the difference between a line and payload loopback.

Usage Examples

The following example initiates a remote line loopback using the FDL:

(config)#

interface t1 1/1

(config-t1 1/1)#

loopback remote line fdl

T1 Network Interface

DS1

NI CSU

Payload Loopback

Line Loopback

1 2 ... 336 337 338 339 340 341 342 343 344 345 346 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 341

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing