ADTRAN Stub Routing Spezifikationen Seite 398

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 568
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 397
Frame Relay Interface Config Command Set Command Reference Guide
398 © 2003 ADTRAN, Inc. 61950860L1-35D
FRAME RELAY INTERFACE CONFIG COMMAND SET
To activate the Frame Relay Interface Configuration command set, enter the interface frame-relay
command at the Global Configuration Mode prompt. For example:
Router>
enable
Router#
configure terminal
Router(config)#
interface frame-relay 1
Router(config-fr 1)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
alias <text> on page 556
description on page 557
do on page 558
end on page 559
exit on page 560
shutdown on page 561
All other commands for this command set are described in this section in alphabetical order.
encapsulation frame-relay ietf on page 399
frame-relay intf-type <type> on page 400
frame-relay lmi-n391dce <seconds> on page 401
frame-relay lmi-n391dte <seconds> on page 402
frame-relay lmi-n392dce <threshold> on page 403
frame-relay lmi-n392dte <threshold> on page 404
frame-relay lmi-n393dce <counter> on page 405
frame-relay lmi-n393dte <counter> on page 406
frame-relay lmi-t391dte <seconds> on page 407
frame-relay lmi-t392dce <seconds> on page 408
frame-relay lmi-type <type> on page 409
snmp trap on page 410
snmp trap link-status on page 411
Seitenansicht 397
1 2 ... 393 394 395 396 397 398 399 400 401 402 403 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare