ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 294)

100

101

Ethernet Interface Configuration Command Set Command Reference Guide

nat source list <access list names> address <IP address> overload

All packets passed by the access list(s) entered will be modified to replace the source IP address

with the entered IP address. The overload keyword allows multiple source IP addresses to be

replaced with the single IP address entered. This hides private IP addresses from outside the local

network.

nat source list <access list names> interface <interface> overload

All packets passed by the access list(s) entered will be modified to replace the source IP address

with the primary IP address of the listed interface. The overload keyword allows multiple source IP

addresses to be replaced with the single IP address of the specified interface. This hides private IP

addresses from outside the local network.

nat destination list <access list names> address <IP address>

All packets passed by the access list(s) entered will be modified to replace the destination IP

address with the entered IP address. The overload keyword is not an option when performing

NAT on the destination IP address; each private address must have a unique public address. This

hides private IP addresses from outside the local network.

Step 4:

Apply the created access policy to an interface. To assign an access policy to an interface, enter the

interface configuration mode for the desired interface and enter access policy <policy name>. The

following example assigns access policy MatchAll to the ethernet 0/1 interface:

(config)# interface ethernet 0/1

(config-eth 0/1)# access-policy MatchAll

Technology Review (Continued)

1 2 ... 289 290 291 292 293 294 295 296 297 298 299 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 294

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing