ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 441)

100

101

Command Reference Guide Frame Relay Sub-Interface Config Command Set

frame-relay be <committed burst value>

Use the frame-relay be command to set the b

(excessive burst) value for a frame relay sublink. The value

is in bits. The time interval is always one second, so this can also be considered bits per second. Shaping

is performed on a sliding one-second window to make maximum use of configured bandwidth. Note that

when both b

and b

are non-zero, shaping is performed on the virtual circuit. The circuit is limited to the

sum of b

and b

Syntax Description

Enter the committed burst value (in bits) for the sublink.

Default Values

The default is 0 (no limit).

Command Modes

(config-fr 1.1)# Virtual Frame Relay Sub-Interface Configuration Mode required

Command History

Release 4.1 Command was introduced

Usage Examples

The following example configures sublink fr 1.1 with an excessive burst value of 64000 bits:

(config)#

interface fr 1.1

(config-fr 1.1)#

frame-relay be 64000

1 2 ... 436 437 438 439 440 441 442 443 444 445 446 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 441

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing