ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 164)

100

101

Global Configuration Mode Command Set Command Reference Guide

interface <port-type> <slot/port>

Activates the Interface Configuration Mode for the listed physical interface.

Syntax Description

<port-type>

Identifies the physical port type of the installed Network Interface Module (NIM)

Dial-Backup Interface Module (DIM) or Ethernet port. Type

interface ?

for a

complete list of valid interfaces.

Specifies an interface based on its physical location (slot and port). For example,

if you have a T1/DSX-1 NIM installed in Slot 1 of an AOS product:

• The WAN-T1 port would be specified in the CLI as t1 1/1.

• The DSX-1 port would be specified as t1 1/2.

• If (for example) a BRI DIM is also installed, then the DBU port of the NIM

card would be specified as bri 1/3.

If you are specifying a port that is built into the base unit (e.g., the Ethernet port),

the slot number is

. For example, the Ethernet (

LAN

) port would be specified as

ethernet 0/1

Default Values

No default values required for this command.

Command Modes

(config)# Global Configuration Mode required

Command History

Release 1.1 Command was introduced

Usage Examples

The following example enters the serial interface command set for a serial module installed in slot 1:

(config)#

interface serial 1/1

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 164

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing