ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 451)

100

101

Command Reference Guide Frame Relay Sub-Interface Config Command Set

ip ospf

Use the ip ospf command to customize OSPF settings (if needed).

Syntax Description

authentication-key

Assign a simple-text authentication password to be used by other routers using

the OSPF simple password authentication.

cost <value>

Specify the OSPF cost of sending a packet on the interface. This value

overrides any computed cost value. Range: 1-65535.

dead-interval

Set the maximum interval allowed between hello packets. If the maximum is

exceeded, neighboring devices will determine that the device is down. Range:

0-32767.

hello-interval

Specify the interval between hello packets sent on the interface. Range:

0-32767.

message-digest-key

Configure OSPF Message Digest 5 (MD5) authentication (16-byte max) keys.

priority

<value>

Set the OSPF priority. The value set in this field helps determine the designated

router for this network. Range: 0-255.

retransmit-interval

Specify the time between link-state advertisements (LSAs). Range: 0-32767.

transmit-delay

Set the estimated time required to send an LSA on the interface. Range:

0-32767.

Default Values

retransmit-interval

5 seconds

transmit-delay

1 second

hello-interval

10 seconds: Ethernet, point-to-point, frame relay, and ppp

dead-interval

40 seconds

Command Modes

(config-interface)# Valid interfaces include: Ethernet (eth 0/1), virtual frame relay (fr 1), and virtual

PPP (ppp 1).

Command History

Release 3.1 Command was introduced

1 2 ... 446 447 448 449 450 451 452 453 454 455 456 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 451

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing