ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 514)

100

101

Loopback Interface Configuration Command Set Command Reference Guide

mtu <size>

Use the mtu command to configure the maximum transmit unit size for the active interface. Use the no

form of this command to return to the default value.

Syntax Description

<size>

Configures the window size for transmitted packets. The valid ranges for the

various interfaces are listed below:

Ethernet (eth 0/1)

64 to 1500

virtual frame relay sub-interfaces (fr 1.16)

64 to 1520

virtual PPP interfaces (ppp 1)

64 to 1500

loopback interfaces

64 to 1500

Default Values

<size>

The default values for the various interfaces are listed below:

Ethernet (eth 0/1)

1500

virtual frame relay sub-interfaces (fr 1.16)

1500

virtual PPP interfaces (ppp 1)

1500

loopback interfaces

1500

Command Modes

(config-interface)# Interface Configuration Mode required (applies only to IP interfaces)

Valid interfaces include: Ethernet (eth 0/1), virtual frame relay sub-interfaces

(fr 1.16), virtual PPP interfaces (ppp 1), and loopback interfaces.

Command History

Release 1.1 Command was introduced

Functional Notes

OSPF will not become adjacent on links where the MTU sizes do not match. If router A and router B are

exchanging hello packets but their MTU sizes do not match, they will never reach adjacency. This is by design

and required by the RFC.

Usage Examples

The following example specifies an MTU of 1200 on the loopback interface:

(config)#

interface loopback 1

(config-loop 1)#

mtu 1200

1 2 ... 509 510 511 512 513 514 515 516 517 518 519 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 514

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing