ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 360)

100

101

Serial Interface Configuration Command Set Command Reference Guide

SERIAL INTERFACE CONFIGURATION COMMAND SET

To activate the Serial Interface Configuration command set, enter the interface serial command at the

Global Configuration Mode prompt. For example:

Router>

enable

Router#

configure terminal

Router(config)#

interface serial 1/1

Router(config-ser 1/1)#

The following commands are common to multiple command sets and are covered in a centralized section

of this guide. For more information, refer to the sections listed below:

alias <“text”> on page 556

description on page 557

do on page 558

end on page 559

exit on page 560

shutdown on page 561

All other commands for this command set are described in this section in alphabetical order.

et-clock-source <source> on page 361

ignore dcd on page 362

invert etclock on page 363

invert rxclock on page 364

invert txclock on page 365

serial-mode <mode> on page 366

snmp trap on page 367

snmp trap link-status on page 368

1 2 ... 355 356 357 358 359 360 361 362 363 364 365 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 360

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing