ADTRAN Stub Routing Spezifikationen Seite 172

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 568
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 171
Global Configuration Mode Command Set Command Reference Guide
172 © 2003 ADTRAN, Inc. 61950860L1-35D
The following is the list of TCP port numbers that may be identified using the text
name (in
bold
):
/jointfilesconvert/276670/bgp
(Port 179)
lpd
(Port 515)
chargen
(Port 19)
nntp
(Port 119)
cmd
(Port 514)
pim-auto-rp
(Port 496)
daytime
(Port 13)
pop2
(Port 109)
discard
(Port 9)
pop3
(Port 110)
domain
(Port 53)
smtp
(Port 25)
echo
(Port 7)
sunrpc
(Port 111)
exec
(Port 512)
syslog
(Port 514)
finger
(Port 79)
tacacs
(Port 49)
ftp
(Port 21)
talk
(Port 517)
gopher
(Port 70)
tftp
(Port 69)
hostname
(Port 101)
telnet
(Port 23)
ident
(Port 113)
time
(Port 37)
irc
(Port 194)
uucp
(Port 540)
klogin
(Port 543)
whois
(Port 43)
kshell
(Port 544)
www
(Port 80)
login
(Port 513)
<destination ip>
Specifies the destination IP address used for packet matching
IP addresses can be expressed in one of three ways:
1. Using the keyword
any
to match any IP address. For example, entering
deny
any
will effectively shut down the interface that uses the access list because all
traffic will match the
any
keyword.
2. Using the
host
<A.B.C.D> to specify a single host address. For example,
entering
permit 196.173.22.253
will allow all traffic from the host with an IP
address of 196.173.22.253.
3. Using the <A.B.C.D> <wildcard> format to match all IP addresses in a range.
Wildcard masks work in reverse logic from subnet mask. Specifying a one in the
wildcard mask equates to a dont care. For example, entering
deny 192.168.0.0
0.0.0.255
will deny all traffic from the 192.168.0.0/24 network.
<destination port>
*Optional
Only valid when <protocol>
is
tcp
or
udp
(See previously listed <source port> for
more details)
<icmp-type>
*Optional
Filter packets using ICMP defined (and numbered) messages carried in IP
datagrams (used to send error and control information). Valid range is 0 to 255.
Syntax Description (Continued)
Seitenansicht 171
1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare