ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 169)

100

101

Command Reference Guide Global Configuration Mode Command Set

Step 3: (VALID ONLY FOR T1 INTERFACES)

Specify the group of DS0s used for signaling on the T1 interface by creating a

tdm-group

. Group any number

of aggregate DS0s together to create a data pipe for layer 2 signaling. Also use the

tdm-group

command to

specify the per-DS0 signaling rate on the interface. For example, the following creates a tdm-group labeled

containing 20 DS0s (each DS0 having a data rate of 56 kbps).

(config)#

interface t1 1/1

(config-t1 1/1)#

tdm-group 9 timeslots 1-20 speed 56

(config-t1 1/1)#

exit

Step 4:

Make the association between the layer 2 endpoint and the physical interface using the

cross-connect

command. Supported layer 2 protocols include frame relay and point-to-point protocol (PPP). For example, the

following creates a cross-connect (labeled

) to make an association between the PPP virtual interface (

ppp 7

)

and the tdm-group configured on interface t1 1/1 (

tdm-group 9

(config)#

cross-connect 5 t1 1/1 9 ppp 7

Usage Examples

The following example creates a PPP virtual interface (labeled

) and enters the PPP Interface Configuration

Mode:

(config)#

interface ppp 1

(config-ppp 1)#

Functional Notes (Continued)

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 169

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing