ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 208)

100

101

Global Configuration Mode Command Set Command Reference Guide

ip policy-class <policyname> max-sessions

Use the ip policy-class command to create an access control policy and enter the access control policy

command set. Use the no form of this command to delete an access policy and all the entries contained in

it.

Configured access policies will only be active if the ip firewall command has been entered

at the Global Configuration Mode prompt to enable the ADTRAN OS security features. All

configuration parameters are valid, but no security data processing will be attempted

unless the security features are enabled.

Before applying an access control policy to an interface, verify your Telnet

connection will not be affected by the policy. If a policy is applied to the interface you

are connecting through and it does not allow Telnet traffic, your connection will be

lost.

Syntax Description

Alphanumeric descriptor for identifying the configured access policy (all access

policy descriptors are case-sensitive).

max-sessions

*Optional

Configure a maximum number of allowed policy sessions. This number must be

within the appropriate range limits. The limits are either 1-4000 or 1-30000

(depending on the type of AOS device you are using).

Default Values

By default, all ADTRAN OS security features are disabled and there are no configured access lists.

Command Modes

(config)# Global Configuration Mode

Command History

Release 2.1 Command was introduced

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 208

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing