ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 42)

100

101

Enable Mode Command Set Command Reference Guide

copy xmodem <destination>

Use the copy xmodem command to copy a file (using the XMODEM protocol) to a specified destination.

XMODEM capability is provided in terminal emulation software such as HyperTerminal™.

Syntax Description

Specifies the destination of the copied file.

Valid destinations include:

flash

(FLASH memory),

startup-config

(the

configuration file stored in NVRAM), or

running-config

(the current running

configuration file).

After entering copy xmodem and specifying a destination, the ADTRAN OS prompts for the following

information:

Destination filename:

Specifies the filename to use when storing the copied file to FLASH memory.

(Valid only for the

copy flash

command.)

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Command History

Release 1.1 Command was introduced

Usage Examples

The following example copies a .biz file to flash memory and labels it newfile.biz:

copy xmodem flash

Destination filename

newfile.biz

Begin the Xmodem transfer now...

Press CTRL+X twice to cancel

CCCCCC

The ADTRAN OS is now ready to accept the file on the

CONSOLE

port (using the XMODEM protocol). The

next step in the process may differ depending on the type of terminal emulation software you are using. For

HyperTerminal, you will now select

Transfer

Receive File

and browse to the file you wish to copy. Once the

transfer is complete, information similar to the following is displayed:

Received 231424 bytes.

Transfer complete.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 42

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing