ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 498)

100

101

Loopback Interface Configuration Command Set Command Reference Guide

bandwidth <value>

Use the bandwidth command to provide the bandwidth value of an interface to the higher-level protocols.

This value is used in cost calculations. Use the no form of this command to restore the default values.

Syntax Description

<value>

Enter bandwidth in kbps.

Default Values

To view default values, use the show interfaces command.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), Frame Relay Virtual Sub-interfaces

(fr 1.20), virtual PPP (ppp 1), and loopback interfaces

Command History

Release 3.1 Command was introduced

Functional Notes

The

bandwidth

command is an informational value that is communicated to the higher-level protocols to be

used in cost calculations. This is a routing parameter only and does not affect the physical interface.

Usage Examples

The following example sets bandwidth of the loopback interface to 10 Mbps:

(config)#

interface loopback 1

(config-loop 1)#

bandwidth 10000

1 2 ... 493 494 495 496 497 498 499 500 501 502 503 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 498

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing