ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 386)

100

101

BRI Interface Configuration Command Set Command Reference Guide

bonding txadd-timer <seconds>

Use the bonding txadd-timer command to specify the value (in seconds) for the aggregate call connect

timeout. Use the no form of this command to return to the default value.

Syntax Description

Specifies the number of seconds the endpoint will wait for additional channels (to

add to the bonded aggregate) before considering the BONDING negotiation a

failure

Default Values

<seconds> 50 seconds

Command Modes

(config-bri 1/2)# BRI Interface Configuration Mode required

Command History

Release 1.1 Command was introduced

Functional Notes

Specifies the length of time both endpoints wait for additional calls to be connected at the end of negotiation

before deciding that the BONDING call has failed. The factory default setting is sufficient for most calls to

connect, although when dialing overseas it may be necessary to lengthen this timer to allow for slower call

routing.

Usage Examples

The following example defines a txadd-timer value of 95 seconds:

(config)#

interface bri 1/2

(config-bri 1/2)#

bonding txadd-timer 95

1 2 ... 381 382 383 384 385 386 387 388 389 390 391 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 386

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing