ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 328)

100

101

DDS Interface Configuration Command Set Command Reference Guide

clock source <option>

Use the clock source command to configure the source timing used for the interface. The clock specified

using the clock source command is also the system master clock. Use the no form of this command to

return to the default value.

Syntax Description

Configures the timing source for the DDS interface.

line

Configures the unit to recover clocking from the circuit.

internal

Configures the unit to provide clocking using the internal oscillator.

Default Values

<option> line

Command Modes

(config-dds 1/1)# 56K/64K (DDS) Interface Configuration Mode required

Command History

Release 1.1 Command was introduced

Functional Notes

When operating on a DDS network, the

clock source

should be

line

. On a point-to-point private network, one

unit must be

line

and

the other

internal

Usage Examples

The following example configures the unit to recover clocking from the circuit:

(config)#

interface dds 1/1

(config-dds 1/1)#

clock source line

1 2 ... 323 324 325 326 327 328 329 330 331 332 333 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 328

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing