ADTRAN Stub Routing Spezifikationen PDF herunterladen (Seite 558)

100

101

Common Commands Command Reference Guide

Use the do command to execute any ADTRAN OS command, regardless of the active configuration mode.

Syntax Description

No subcommands

Default Values

No defaults required for this command.

Command Modes

Any Configuration Mode

Command History

Release 2.1 Command was introduced

Functional Notes

Use the

command to view configurations or interface states after configuration changes are made without

exiting to the Enable mode.

Usage Examples

The

command provides a way to execute commands in other command sets without taking the time to exit

the current command set and enter the desired one. The following example shows the

command used to

view the frame relay interface configuration while currently in the T1 interface command set:

(config)#

interface t1 1/1

(config-t1 1/1)#

do show interfaces fr 7

fr 7 is ACTIVE

Signaling type is ANSI signaling role is USER

Polling interval is 10 seconds full inquiry interval is 6 polling intervals

Output queue: 0/0 (highest/drops)

0 packets input 0 bytes

0 pkts discarded 0 error pkts 0 unknown protocol pkts

0 packets output 0 bytes

0 tx pkts discarded 0 tx error pkts

1 2 ... 553 554 555 556 557 558 559 560 561 562 563 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

ADTRAN Stub Routing Spezifikationen Seite 558

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ADTRAN Stub Routing